• Remote control copy method of electric retractable door
    Remote control copy method of electric retractable door

    1. The remote control it is equipped with is generally not well understood by many people, so in order for the newly purchased remote control to be used normally, all we have to do is to confirm whether there are any quality problems before copying normally. In addition, there is an understanding of the transmission frequency of the remote control. The technical term is called the crystal value. In addition, you need to see the chip model in the manual. The specific copy method needs to be cleared and copied. When you press the remote control with both hands at the same time, the indicator light will flash continuously, and then release your hands, it means the clearing is successful, just press a button, and the indicator light on the remote control will go out once it lights up. Your operation is successful. 2. Align the old remote control with the current remote control, and then press the door open button of the two remote controls at the same time with both hands, then the lights will flash quickly, which means success. Note that the remote control is best to be close, just like the Bluetooth and infrared transmission of the mobile phone, it is limited by the distance, and the copy method of the other three keys is the same as above, and you can proceed in sequence. The above related content about the copy method of the electric retractable door remote control is introduced here, I hope this will be helpful to everyone. If you still don’t understand, you can contact Quanzhou QINUO Electronics. If you want to know more about this, please continue to pay attention to our website www.qinuo.net.

    view more
  • How to Know Which Type of Garage Door Opener Remote to Buy?
    How to Know Which Type of Garage Door Opener Remote to Buy?

    From a perspectives of end user, extra garage door opener remotes come in handy; however, choosing the right opener can be confusing. We could find many manufacturer in the market, they produce the replacement remotes and universal remotes. You must determine the features you need and the size of the remote. Full-size remotes clip onto the car visor. This is convenient; however, it may become a security risk if your car is stolen. Mini-remotes clip onto your key chain and operate just like a full-size remote. Keeping the Garage Door Opener Information When you are installing your garage door please do keep the import information. Find the brand name, and the model you use. Using the manufacturer information, you can purchase an exact replacement for the garage door remote by matching brand and model number and purchasing it directly from a representative of the manufacturer, your local hardware store or online. If you have an older garage door opener, this is the way to go. Many universal remotes do not work on older models, but the manufacturers still sell the remotes. Using Universal Garage Door Remote Controls Universal garage door remote controls are available that you can program for use with most brands of newer garage door openers. You still need to know the manufacturer to make sure the remote works for your garage door and to program the remote. You can program universal garage door openers to open one or two garage doors. With the addition of a light control switch, a universal remote also turns on the garage light or your home lights. If you have a newer garage door opener but you are unsure of the exact model, a universal remote will probably do the trick. Programming the Remote If you purchase the remote for your particular brand of garage door, programming is usually simple. You press, hold and release the buttons in the pattern specified in the instructions and the remote will automatically determine the right radio frequencies for your garage door opener. Universal remotes are a little more complicated. You have to first set the dip switches on the remote to indicate the garage door opener brand, then the radio frequency. Your universal remote should come with a full set of programming instructions.

    view more
  • Gate Opener low frequency remote control duplicator 27mhz
    Gate Opener low frequency remote control duplicator 27mhz

    Hi everyone, this is Anna again. Hope you got a great week. Here is introducing our new item for garage door remote control. Low frequency remote with 27Mhz and 40 Mhz for the frequency. We all know that the regular frequency for garage door remote is 315Mhz, 433Mhz, and 868Mhz. But as the data shows which the low frequency still is popular in EURO countries like Germany, Italy, UK, and France etc.. Here we go with the new member here, QN-RD604! With the simple case design, you might find it is quite comfortable when you see it at first sight. Four buttons with big button, which is suitable for the body structure of European. Four nice colors with red, blue, yellow, and black. And also we are OEM manufacturer, you could add any printing logo as you like. Your company name, brand logo, CE /FCC symbol as you like. The basic function is to work with your garage door motor, which the frequency and system is compatible with 27~40Mhz for the frequency. We re-design the program inside to make the operation with face to face copy. So even you are not a professional locksmith or user, you could learn it very easily like piece of cake. AS below are the more information for QN-RD604. If you are interested, please just be free to contact Anna. Thank you & have a nice weekend.

    view more
  • How to program Horman remote control?
    How to program Horman remote control?

    Horman gate and automation is quite popular in European countries like UK, Germany, Italy, France etc. Which motivates the demand of Horman remote control. To help people who lose their original garage door remote. But most of them will doubt how to program it, is it easy for common people who is not involved the garage door industry? The answer is yes, and the operation will be available for everyone. Hormann garage door remote controls are very popular in UK, Europe and Russia, and Hormann HSM4 and HSE2 are two bestseller in Hormann remote control product line, due to their easy to carry keyring size and performance. Basically Hormann HSM4 is the four button version and Hormann HSE2 is two button version, in most circumstances, two button is enough for garages in home, so HSE2 is more popular used than HSM4. The Hormann remote control line covers three frequencies, oldest 40.685 MHz, older 433.92 MHz and the now mainstream 868.3 MHz, and for each frequency, there are several models, for example, there are HS1-868, HS4-868, HSM4-868 and HSE2-868 at 868 MHz frequency range, as for 433 MHz range, there are three models, which are HS4-433, HSM4-433 and HSE2-433. Different frequency can be considered as different generation, and there are several members in each generation, they are fully compatible and interchangable with each other, as long as frequency is the same.Take the now most popular Hormann HSE2-868 for example, it transmits at 868.3 MHz narrow-band frequency range, and is a self-learning transmitter which can learn code from existing already programmed remote controls, its code is fixed code, so can be duplicated or cloned by other transmitters. For original Hormann HSE2 or HSM4 garage door remote control, the face to face self learning instructions is as follows. 1. Place the original transmitter that is already programmed and the newly bought transmitter directly next to one another. 2. Press and hold the button to be used on the original transmitter. The LED on remote control will then light up and remain lit. 3. Press and hold the corresponding button on new learning transmitter immediately afterwards – the LED on new learning transmitter will flash slowly for 4 seconds and begin to flash quicker when the learning procedure was successful. 4. Release the buttons on both transmitters. And remember to test the function of new transmitter after finished, or repeat above steps if you need to program another gate remote control. Since Hormann HSE2 or HSM4 garage door remote control is fixed code, so it can be replaced by our much cheaper SR-RCD-868 duplicating gate remote control, our cloning remote control duplicator has been sold over 100K units so far, and is widely used in many countries.

    view more
  • The Best Garage Door Openers
    The Best Garage Door Openers

    Here's some advice on how to pick the best garage door opener that will last you many years. Garage door openers are often overlooked since there’s a good chance your home likely came with one pre-installed. But if you’re shopping for a new garage door opener, the process isn’t as straightforward as you may think. Modern systems have a plethora of features and add-ons, and there are now numerous types of garage door openers available in a wide range of prices. Overall, garage door openers aren’t too expensive, but you’ll want to make sure you choose one that will last many years. Although there are a few different types of openers, their core functionality is the same. Every unit features a motor that moves a trolley that is connected to the door. When the trolley is engaged, it moves the garage door up or down and the main difference between the types is the driving utility. In this article, we’ll dive deeper into the different types of garage door openers, features to look for, and how to choose the right one. 1. Chamberlain Smartphone-Controlled Garage Door Opener (B970) 2. Sommer Direct Drive Garage Door Opener (1042V001) 3. Liftmaster 8500 Wall Mount Garage Door Opener 4. Genie SilentMax 1200 Garage Door Opener 5.  Decko Garage Door Opener (24300/24503) When shopping for a garage door opener, you will likely run into four common types: chain drive, belt drive, screw drive, and direct drive. You’ll want to know the differences between the four, as their prices and features differ. Chain drive openers feature a metal chain that engages the trolley to open and close the garage door. These openers are generally the most affordable, but they are noisy due to the moving chain. They’re most ideal for detached garages or if you’re not sensitive to noise. Avoid this type of opener if you live directly above your garage door. Belt-driven garage openers uses a rubber belt instead of a chain to drive the trolley. Since the trolley is moving over rubber instead of a metal chain, these door openers are smoother and quieter, resulting in less vibrations. There are also less moving parts, so these systems generally require less maintenance than chain openers. Screw drive openers are similar to belt drive openers in that there are less moving parts and they’re quieter than chain openers. Screw-driven openers use a threaded steel rod to move the trolley, which lifts and lowers as the rod rotates. These openers also require less maintenance compared to chain openers and are ideal for attached garages since there’s less vibration and noise. The fourth type of common garage door opener is a direct drive opener, which doesn’t use a belt, chain, or a threaded piece to operate. These are the least complex openers since the motor itself moves the trolley.

    view more
first last

a total of 1 Page

Our Company

  • QINUO ELECTRONICS CO.,LTD was established in 2009,for now with 185 workers,65 office workers,125 factory workers. We mainly produce car key remotes,face to face remotes,compatible remotes,garage door control boards,various car auto parts. With 8 years experience and continuous efforts of our team enable us to provide customers with high qualified p1
    Office View
  • Our factory: Around 5133㎡ Standardized dust-free plants,strict measures to prevent static-current problem.100% inspection by workers and stict IPQC through entire order process. Introduced U-shape production line that significantly reduced the piling of work-in-process. Streamlined production line  ensures a high pass rate of each step. Equipp1
    Factory View
  • R&D dept was established since the beginning of QINUO ELECTRONICS,we attach much importance in developing new products for demand and providing solution to customers...... R&D team: Two R&D offices,one locates in QUANZHOU with 20 engineers,the other office locates in Wuhan city with 8 engineers. 16 software engineers,6 hardware engineer1
  • For company: SGS-CSTC,ISO9001:2008,IS014001,ISO/TS16949:2009 authorized 5 stars supplier of Global Sources.com 8th year Golden Supplier of Alibaba.com 9th year Gold member and audited supplier of Made in China.com For products: we have CE,RoHS,IP55,C-TICK,FCC,SASO…and have cooperated laboratory for years,with ability to provide you different certif1
Contact Us
  • got questions? call us

    +86 13960286508

  • fax :

    +86 595 22901208
  • Email :

  • 3rd Floor Building A Yucheng Base Keji Rd,Fengze district,Fujian Province,China
get started

If you have any problem when using the website or our products, please write down your comments or suggestions, we will answer your questions as soon as possible!Thank you for your attention!

    get started